Approach noses are used to separate
two lanes and form the end of an island.
Sodirel makes several types of approach nose
|
 |
The BM4 approach
nose
The BM4 range is made of high density polyethylene with a rigid
structure and hollow shell. It can be filled inside with water
or outside with sand. They come in 1 or 2 metre diameters, with
a fast-coloured green and a class I or II retroreflective film. |
| |
|
 |
|
 |
 |
The BM4 CLOSED
approach nose
The BM4 FERME range is made of high density polyethylene. Its
monobloc design gives it excellent ground stability. BM4 FERME
approach noses can be filled with ballast or fixed to the ground.
They come in 1 or 2 metre diameters, with a fast-coloured green
and a class I or II retroreflective film. |
|
 |
The MANTA approach
nose
The MANTA range is used to indicate diverging traffic. Fixed to the ground,
it is designed to be impacted without risk of bursting and driven over
without acting as a springboard. It immediately resumes its original
position after impact. MANTA approach noses have a class I or II retroreflective
film. Made of POP (polyolefin plastomer) |
| |
 |
ALU LATERAL
SHIFT MARKERS
Class II retroreflective film bonded to aluminium sheet.
Length: 1500 mm, 1600 mm, 3000 mm
and 3200 mm x 400 mm high. |
| |
 |
|
|
|
 |
