 |
The
COBRA PLATINE bollard
The Cobra Platine J11 - J12 - K5D bollard is a polyethylene
bollard that immediately rebounds after impact to ensure continuous
traffic guidance. It is installed using an expansion bolt and
a two-component material.
|
| |
|
 |
|
 |
 |
The
COBRA SOCLE bollard
The Cobra Socle is an interchangeable bollard on a recycled
rubber and plastic base. It is installed by locking it with
a quarter turn into a base attached to the ground. |
|
 |
The
COBRA INOX bollard
The Cobra Inox stainless steel bollard is installed by inserting
it into a base drilled in the roadway. It is designed to facilitate
snow ploughing and traffic channelisation. |
| |
 |
The
Alligator bollard
The flexible Alligator bollard rebounds after being flattened,
without any danger for users. It is particularly suitable for
urban applications and cycle paths. It exists in green, orange
and white. |
|
 |
The
BGP 1000 bollard
The BGP 1000 bollard is made of sand or water-filled high-density
polyethylene. It has a fixation on the top to facilitate handling
and accommodate chains. Available with a round or square base. |
|
 |
JIJ3
bollards
These bollards are extruded and blow-moulded. Robust and highly
resistant, they are perfect for bends and intersections. Particular
care has been taken to give them an attractive finish: constant
thickness, class II aluminium band with moulding. Installed
on a base or attached to a crash barrier. |
|
 |
J13
OBSTACLE INDICATOR
The J13 is aimed at indicating obstacles on the road such as
bridge piers, parapets, and so on. Made of polyethylene it can
be inserted into an HDPE base embedded in the ground or fixed
to a galvanised base. |
| |
|
 |
Galvanised base plate for ground attachment. |
| |
|
 |
Embedded HDPE base. |
| |
 |
|
|
|
 |
